Arsenazo III AR MSDS

Arsenazo III AR MSDS

 

Section 1: Chemical Product and Company Identification

Product Name: Arsenazo III AR

Catalog Codes: SLA3703

CAS#: 1688-00-4

RTECS: Not available.

TSCA: TSCA 8(b) inventory: No products were found.

CI#: Not available.

Synonym:

Chemical Formula: C22H18N4O14S2As2

 

Section 2: Composition and Information on Ingredients

Composition:

Name CAS # % by Weight

Arsenazo III AR 1688-00-4 100

Toxicological Data on Ingredients: Arsenazo III AR LD50: Not available. LC50: Not available.

 

Section 3: Hazards Identification

Potential Acute Health Effects:

Extremely hazardous in case of skin contact (corrosive, irritant), of eye contact (irritant), of ingestion, of inhalation.

Hazardous in case of skin contact (permeator). The amount of tissue damage depends on length of contact. Eye

contact can result in corneal damage or blindness. Skin contact can produce inflammation and blistering.

Inhalation of dust will produce irritation to gastro-intestinal or respiratory tract, characterized by burning, sneezing

and coughing. Severe over-exposure can produce lung damage, choking, unconsciousness or death.

Inflammation of the eye is characterized by redness, watering, and itching. Skin inflammation is characterized by

itching, scaling, reddening, or, occasionally, blistering.

Potential Chronic Health Effects:

Extremely hazardous in case of skin contact (corrosive, irritant), of eye contact (irritant), of ingestion, of inhalation.

Hazardous in case of skin contact (permeator).

CARCINOGENIC EFFECTS: Classified A1 (Confirmed for human.) by ACGIH, 1 (Clear evidence.) by NTP, +

(Proven.) by OSHA.

MUTAGENIC EFFECTS: Not available.

TERATOGENIC EFFECTS: Not available.

DEVELOPMENTAL TOXICITY: Not available.

The substance is toxic to kidneys, lungs, liver.

Repeated or prolonged exposure to the substance can produce target organs damage. Repeated exposure of the

eyes to a low level of dust can produce eye irritation. Repeated skin exposure can produce local skin destruction,

or dermatitis. Repeated inhalation of dust can produce varying degree of respiratory irritation or lung damage.

Repeated exposure to a highly toxic material may produce general deterioration of health by an accumulation in

one or many human organs. Repeated or prolonged inhalation of dust may lead to chronic respiratory irritation.

 

Section 4: First Aid Measures

Eye Contact:

Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at

least 15 minutes. Get medical attention immediately.

Skin Contact:

In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated

clothing and shoes. Cover the irritated skin with an emollient. Wash clothing before reuse. Thoroughly clean

shoes before reuse. Get medical attention immediately.

Serious Skin Contact:

Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate

medical attention.

Inhalation:

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get

medical attention immediately.

Serious Inhalation:

Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or

waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth

resuscitation. WARNING: It may be hazardous to the person providing aid to give mouth-to-mouth resuscitation

when the inhaled material is toxic, infectious or corrosive. Seek immediate medical attention.

Ingestion:

If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by

mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical

attention immediately.

Serious Ingestion: Not available.

 

Section 5: Fire and Explosion Data

Flammability of the Product: May be combustible at high temperature.

Auto-Ignition Temperature: Not available.

Flash Points: Not available.

Flammable Limits: Not available.

Products of Combustion:

These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2...), sulfur oxides (SO2, SO3...). Some

metallic oxides.

Fire Hazards in Presence of Various Substances: Not available.

Explosion Hazards in Presence of Various Substances:

Risks of explosion of the product in presence of mechanical impact: Not available.

Risks of explosion of the product in presence of static discharge: Not available.

Fire Fighting Media and Instructions:

SMALL FIRE: Use DRY chemical powder.

LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Special Remarks on Fire Hazards: Not available.

Special Remarks on Explosion Hazards: Not available.

 

Section 6: Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.

Large Spill:

Corrosive solid. Poisonous solid.

Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to

reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition

sources. Call for assistance on disposal. Be careful that the product is not present at a concentration level above

TLV. Check TLV on the MSDS and with local authorities.

 

Section 7: Handling and Storage

Precautions:

Keep locked up.. Keep container dry. Keep away from heat. Keep away from sources of ignition. Empty

containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material.

Do not ingest. Do not breathe dust. Never add water to this product. In case of insufficient ventilation, wear

suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label.

Avoid contact with skin and eyes.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.

 

Section 8: Exposure Controls/Personal Protection

Engineering Controls:

Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below

recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to

airborne contaminants below the exposure limit.

Personal Protection:

Splash goggles. Synthetic apron. Vapor and dust respirator. Be sure to use an approved/certified respirator or

equivalent. Gloves.

Personal Protection in Case of a Large Spill:

Splash goggles. Full suit. Vapor and dust respirator. Boots. Gloves. A self contained breathing apparatus

should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a

specialist BEFORE handling this product.

Exposure Limits:

TWA: 0.5

Consult local authorities for acceptable exposure limits.

 

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid.

Odor: Not available.

Taste: Not available.

Molecular Weight: 776.37 g/mole

Color: Not available.

pH (1% soln/water): Not available.

Boiling Point: Not available.

Melting Point: Decomposes.

Critical Temperature: Not available.

Specific Gravity: Not available.

Vapor Pressure: Not applicable.

Vapor Density: 6.25 (Air = 1)

Volatility: Not available.

Odor Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available.

Dispersion Properties: Not available.

Solubility: Not available.

 

Section 10: Stability and Reactivity Data

Stability: The product is stable.

Instability Temperature: Not available.

Conditions of Instability: Not available.

Incompatibility with various substances: Not available.

Corrosivity: Non-corrosive in presence of glass.

Special Remarks on Reactivity: Not available.

Special Remarks on Corrosivity: Not available.

Polymerization: Will not occur.

 

Section 11: Toxicological Information

Routes of Entry: Dermal contact. Eye contact. Inhalation. Ingestion.

Toxicity to Animals:

LD50: Not available.

LC50: Not available.

Chronic Effects on Humans:

CARCINOGENIC EFFECTS: Classified A1 (Confirmed for human.) by ACGIH, 1 (Clear evidence.) by NTP, +

(Proven.) by OSHA.

Causes damage to the following organs: kidneys, lungs, liver.

Other Toxic Effects on Humans:

Extremely hazardous in case of skin contact (corrosive, irritant), of eye contact (corrosive), of ingestion, of

inhalation (lung corrosive).

Hazardous in case of skin contact (permeator).

Special Remarks on Toxicity to Animals: Not available.

Special Remarks on Chronic Effects on Humans: Not available.

Special Remarks on other Toxic Effects on Humans: Not available.

 

Section 12: Ecological Information

Ecotoxicity: Not available.

BOD5 and COD: Not available.

Products of Biodegradation:

Possibly hazardous short term degradation products are not likely. However, long term degradation products may

arise.

Toxicity of the Products of Biodegradation: The products of degradation are as toxic as the original product.

Special Remarks on the Products of Biodegradation: Not available.

 

Section 13: Disposal Considerations

Waste Disposal:

 

Section 14: Transport Information

DOT Classification: CLASS 6.1: Poisonous material.

Identification: : Arsenic compound, solid, n.o.s. (Arsenazo III) UNNA: UN1557 PG: III

Special Provisions for Transport: Not available.

 

Section 15: Other Regulatory Information

Federal and State Regulations:

California prop. 65: This product contains the following ingredients for which the State of California has found to

cause cancer, birth defects or other reproductive harm, which would require a warning under the statute:

Arsenazo III

California prop. 65: This product contains the following ingredients for which the State of California has found to

cause cancer which would require a warning under the statute: Arsenazo III

Other Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).

Other Classifications:

WHMIS (Canada):

CLASS D-1A: Material causing immediate and serious toxic effects (VERY TOXIC).

CLASS D-2A: Material causing other toxic effects (VERY TOXIC).

DSCL (EEC):

R35- Causes severe burns.

R45- May cause cancer.

HMIS (U.S.A.):

Health Hazard: 3

Fire Hazard: 1

Reactivity: 0

Personal Protection: j

National Fire Protection Association (U.S.A.):

Health: 3

Flammability: 1

Reactivity: 0

Specific hazard:

Protective Equipment:

Gloves.

Synthetic apron.

Vapor and dust respirator. Be sure to

use an approved/certified respirator or

equivalent. Wear appropriate respirator

when ventilation is inadequate.

Splash goggles.

 

Section 16: Other Information

References: Not available.

Other Special Considerations: Not available.

Created: 10/09/2005 04:16 PM

Last Updated: 11/06/2008 12:00 PM