Synonyms: 2,6-dibromoquinoechloroimide; 2,5-Cyclohexadien-1-one, 2,6-dibromo-4-(chloroimino)-
CAS No.: 537-45-1
Molecular Weight: 299.35
Chemical Formula: C6H2Br2NClO
Product Codes: G407
Ingredient CAS No Percent Hazardous --------------------------------------- ------------ ------------ --------- 2,6-Dibromo-N-chloro-p-benzoquinoneimin 537-45-1 95 - 100% Yes e
Emergency Overview
--------------------------
WARNING! MAY BE HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. MAY CAUSE BURNS TO SKIN AND EYES. HEAT MAY CAUSE EXPLOSIVE DECOMPOSITION.
Potential Health Effects
----------------------------------
Inhalation:
Causes irritation to the respiratory tract. Symptoms may include coughing, shortness of breath.
Ingestion:
Large oral doses may cause irritation to the gastrointestinal tract.
Skin Contact:
Causes irritation to skin. Symptoms include redness, itching, and pain. May cause burns to skin tissue upon contact.
Eye Contact:
Causes irritation, redness, and pain. May cause burns.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
Persons with pre-existing skin disorders or impaired respiratory function may be more susceptible to the effects of the substance.
Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion:
Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact:
Wipe off excess material from skin then immediately flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Fire:
Not considered to be a fire hazard.
Explosion:
Heat sensitive! Can explosively decompose when heated.
Fire Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or regular foam. For large fires, use water spray, fog, or regular foam.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Isolate from heat, ignition sources and oxidizing agents. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Airborne Exposure Limits:
None established.
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
For conditions of use where exposure to the dust or mist is apparent, a half-face dust/mist respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear protective gloves and clean body-covering clothing.
Eye Protection:
Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures:
There is insufficient data in the published literature to assign complete numerical SAF-T-DATA* ratings and laboratory protective equipment for this product. Special precautions must be used in storage, use and handling. Protective equipment for laboratory bench use should be chosen using professional judgment based on the size and type of reaction or test to be conducted and the available ventilation, with overriding consideration to minimize contact with the chemical.
Appearance:
Yellow crystals.
Odor:
No information found.
Solubility:
Slightly soluble in water.
Specific Gravity:
No information found.
pH:
No information found.
% Volatiles by volume @ 21C (70F):
0
Boiling Point:
No information found.
Melting Point:
80 - 85C (176 - 185F)
Vapor Density (Air=1):
No information found.
Vapor Pressure (mm Hg):
No information found.
Evaporation Rate (BuAc=1):
No information found.
Stability:
Stable under ordinary conditions of use and storage. Heat sensitive. Can violently decompose if heated.
Hazardous Decomposition Products:
Toxic oxides of nitrogen and carbon plus hydrogen bromide (gas) and hydrogen chloride (gas) may be formed when heated to decomposition.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Strong oxidizers.
Conditions to Avoid:
Heat, flames, ignition sources and incompatibles.
No LD50/LC50 information found relating to normal routes of occupational exposure.
--------\Cancer Lists\------------------------------------------------------ ---NTP Carcinogen--- Ingredient Known Anticipated IARC Category ------------------------------------ ----- ----------- ------------- 2,6-Dibromo-N-chloro-p-benzoquinonei No No None mine (537-45-1)
Environmental Fate:
No information found.
Environmental Toxicity:
No information found.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
Domestic (Land, D.O.T.)
-----------------------
Proper Shipping Name: CORROSIVE SOLID, N.O.S. (2,6-DIBROMO-N-CHLORO-P- BENZOQUINONEIMINE)
Hazard Class: 8
UN/NA: UN1759
Packing Group: III
Information reported for product/size: 5G
International (Water, I.M.O.)
-----------------------------
Proper Shipping Name: CORROSIVE SOLID, N.O.S. (2,6-DIBROMO-N-CHLORO-P- BENZOQUINONEIMINE)
Hazard Class: 8
UN/NA: UN1759
Packing Group: III
Information reported for product/size: 5G
--------\Chemical Inventory Status - Part 1\--------------------------------- Ingredient TSCA EC Japan Australia ----------------------------------------------- ---- --- ----- --------- 2,6-Dibromo-N-chloro-p-benzoquinoneimine Yes Yes No Yes (537-45-1) --------\Chemical Inventory Status - Part 2\--------------------------------- --Canada-- Ingredient Korea DSL NDSL Phil. ----------------------------------------------- ----- --- ---- ----- 2,6-Dibromo-N-chloro-p-benzoquinoneimine Yes Yes No No (537-45-1) --------\Federal, State & International Regulations - Part 1\---------------- -SARA 302- ------SARA 313------ Ingredient RQ TPQ List Chemical Catg. ----------------------------------------- --- ----- ---- -------------- 2,6-Dibromo-N-chloro-p-benzoquinoneimine No No No No (537-45-1) --------\Federal, State & International Regulations - Part 2\---------------- -RCRA- -TSCA- Ingredient CERCLA 261.33 8(d) ----------------------------------------- ------ ------ ------ 2,6-Dibromo-N-chloro-p-benzoquinoneimine No No No (537-45-1) Chemical Weapons Convention: No TSCA 12(b): No CDTA: No SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No Reactivity: No (Pure / Solid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
WHMIS:
This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR.
NFPA Ratings: Health: 1 Flammability: 0 Reactivity: 0
Label Hazard Warning:
WARNING! MAY BE HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. MAY CAUSE BURNS TO SKIN AND EYES. HEAT MAY CAUSE EXPLOSIVE DECOMPOSITION.
Label Precautions:
No SAF-T-DATA Ratings have been developed for this product. Read and follow all warnings, precautions, instructions and other safety and handling information on the label and MSDS.
Avoid breathing dust.
Avoid contact with eyes, skin and clothing.
Keep container closed.
Keep away from heat and flame.
Use with adequate ventilation.
Wash thoroughly after handling.
Label First Aid:
If swallowed, induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. In all cases, get medical attention.
Product Use:
Laboratory Reagent.
Revision Information:
New 16 section MSDS format, all sections have been revised.
************************************************************************************************
Prepared by: Environmental Health & Safety
Phone Number: (314) 654-1600 (U.S.A.)