Tungsten (Metal) Powder 99% (325 Mesh) MSDS
Section 1: Chemical Product and Company Identification
Product Name: Tungsten (Metal) Powder 99% (325 Mesh)
Catalog Codes: SLT4213
CAS#: 7440-33-7
RTECS: YO7175000
TSCA: TSCA 8(b) inventory: Tungsten (Metal) Powder 99% (325 Mesh)
CI#: Not applicable.
Synonym:
Chemical Formula: W
Section 2: Composition and Information on Ingredients
Composition:
Name CAS # % by Weight
Tungsten (Metal) Powder 99% (325 Mesh) 7440-33-7 100
Toxicological Data on Ingredients: Tungsten LD50: Not available. LC50: Not available.
Section 3: Hazards Identification
Potential Acute Health Effects:
Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Corrosive to
eyes and skin. The amount of tissue damage depends on length of contact. Eye contact can result in corneal
damage or blindness. Skin contact can produce inflammation and blistering. Inhalation of dust will produce
irritation to gastro-intestinal or respiratory tract, characterized by burning, sneezing and coughing. Severe
over-exposure can produce lung damage, choking, unconsciousness or death.
Potential Chronic Health Effects:
Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
CARCINOGENIC EFFECTS: Not available.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated exposure of the eyes to a low level of dust can produce eye irritation. Repeated skin exposure can
produce local skin destruction, or dermatitis. Repeated inhalation of dust can produce varying degree of
respiratory irritation or lung damage.
Section 4: First Aid Measures
Eye Contact: Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.
Skin Contact:
If the chemical got onto the clothed portion of the body, remove the contaminated clothes as quickly as possible,
protecting your own hands and body. Place the victim under a deluge shower. If the chemical got on the victim's
exposed skin, such as the hands : Gently and thoroughly wash the contaminated skin with running water and
non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. If irritation persists, seek
medical attention. Wash contaminated clothing before reusing.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical
attention.
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation:
Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or
waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth
resuscitation. WARNING: It may be hazardous to the person providing aid to give mouth-to-mouth resuscitation
when the inhaled material is toxic, infectious or corrosive. Seek immediate medical attention.
Ingestion:
Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not
breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion: Not available.
Section 5: Fire and Explosion Data
Flammability of the Product: May be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Flash Points: Not available.
Flammable Limits: Not available.
Products of Combustion: Some metallic oxides.
Fire Hazards in Presence of Various Substances: Not available.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Special Remarks on Fire Hazards: Material in powder form, capable of creating a dust explosion.
Special Remarks on Explosion Hazards: Not available.
Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill:
Corrosive solid.
Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to
reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition
sources. Call for assistance on disposal. Be careful that the product is not present at a concentration level above
TLV. Check TLV on the MSDS and with local authorities.
Section 7: Handling and Storage
Precautions:
Keep container dry. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire
risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not breathe dust.
Never add water to this product Wear suitable protective clothing If you feel unwell, seek medical attention and
show the label when possible.
Storage:
Keep container dry. Keep in a cool place. Ground all equipment containing material. Corrosive materials should
be stored in a separate safety storage cabinet or room.
Section 8: Exposure Controls/Personal Protection
Engineering Controls:
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
Personal Protection:
Splash goggles. Synthetic apron. Dust respirator. Be sure to use an approved/certified respirator or equivalent.
Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist
BEFORE handling this product.
Exposure Limits:
TWA: 5 CEIL: 10 (mg/m3) from ACGIH
Consult local authorities for acceptable exposure limits.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid.
Odor: Not available.
Taste: Not available.
Molecular Weight: 183.85 g/mole
Color: Not available.
pH (1% soln/water): Not applicable.
Boiling Point: 5900°C (10652°F)
Melting Point: 3410°C (6170°F)
Critical Temperature: Not available.
Specific Gravity: 19.35 (Water = 1)
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: Not available.
Solubility: Insoluble in cold water.
Section 10: Stability and Reactivity Data
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Not available.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Polymerization: No.
Section 11: Toxicological Information
Routes of Entry: Not available.
Toxicity to Animals:
LD50: Not available.
LC50: Not available.
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans: Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation.
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Not available.
Special Remarks on other Toxic Effects on Humans: Nuisance dust.
Section 12: Ecological Information
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may
arise.
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Waste Disposal:
Section 14: Transport Information
DOT Classification: CLASS 8: Corrosive solid.
Identification: : Metal powder, flammable, n.o.s. (Tungsten powder) : UN3089 PG: III
Special Provisions for Transport: Not available.
Section 15: Other Regulatory Information
Federal and State Regulations:
Pennsylvania RTK: Tungsten
Massachusetts RTK: Tungsten
TSCA 8(b) inventory: Tungsten
Other Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
Other Classifications:
WHMIS (Canada): CLASS E: Corrosive solid.
DSCL (EEC):
This product is not classified according
to the EU regulations.
HMIS (U.S.A.):
Health Hazard: 3
Fire Hazard: 1
Reactivity: 0
Personal Protection:
National Fire Protection Association (U.S.A.):
Health: 3
Flammability: 1
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves.
Synthetic apron.
Dust respirator. Be sure to use an
approved/certified respirator or
equivalent. Wear appropriate respirator
when ventilation is inadequate.
Splash goggles.
Section 16: Other Information
References: Not available.
Other Special Considerations: Not available.
Created: 10/10/2005 12:11 AM
Last Updated: 11/06/2008 12:00 PM