P-Aminopyridine (For Synthesis) (4-Aminopyridine) MSDS
Section 1: Chemical Product and Company Identification
Product Name: P-Aminopyridine (For Synthesis) (4-Aminopyridine)
Catalog Codes: SLA1108
CAS#: 504-24-5
RTECS: US1750000
TSCA: TSCA 8(b) inventory: P-Aminopyridine (For Synthesis) (4-Aminopyridine)
CI#: Not applicable.
Synonym: 4-Pyridinamine
Chemical Name: P-Aminopyridine (For Synthesis) (4-Aminopyridine)
Chemical Formula: C5H6N2
Section 2: Composition and Information on Ingredients
Composition:
Name CAS # % by Weight
{4-}Aminopyridine 504-24-5 100
Toxicological Data on Ingredients: P-Aminopyridine (For Synthesis) (4-Aminopyridine) : ORAL (LD50): Acute: 20 mg/kg [Rat.].
Section 3: Hazards Identification
Potential Acute Health Effects:
Very hazardous in case of ingestion. Hazardous in case of skin contact (irritant, permeator), of eye contact (irritant), of
inhalation. Severe over-exposure can result in death.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available. Repeated exposure to a highly toxic material may produce general deterioration
of health by an accumulation in one or many human organs.
Section 4: First Aid Measures
Eye Contact:
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids
open. Cold water may be used. Get medical attention. Finish by rinsing thoroughly with running water to avoid a possible
infection.
Skin Contact:
In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated
clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical
attention.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical
attention.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical
attention.
Serious Inhalation:
Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If
breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek medical
attention.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.
Serious Ingestion: Not available.
Section 5: Fire and Explosion Data
Flammability of the Product: May be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Flash Points: Not available.
Flammable Limits: Not available.
Products of Combustion: These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2...).
Fire Hazards in Presence of Various Substances: Not available.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in
presence of static discharge: Not available.
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Special Remarks on Fire Hazards: When heated to decomposition it emits toxic fumes.
Special Remarks on Explosion Hazards: Not available.
Section 6: Accidental Release Measures
Small Spill:
Use appropriate tools to put the spilled solid in a convenient waste disposal container. If necessary: Neutralize the residue with
a dilute solution of acetic acid.
Large Spill:
Poisonous solid. Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to
reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition sources. Call for
assistance on disposal. Neutralize the residue with a dilute solution of acetic acid.
Section 7: Handling and Storage
Precautions:
Keep locked up.. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate
the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. Wear suitable
protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice
immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as
acids.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Section 8: Exposure Controls/Personal Protection
Engineering Controls:
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended
exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants
below the exposure limit.
Personal Protection:
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this
product.
Exposure Limits: Not available.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid. (Solid crystalline powder.)
Odor: Not available.
Taste: Not available.
Molecular Weight: 94.12g/mole
Color: Off-white.
pH (1% soln/water): 11 [Basic.]
Boiling Point: 273.5°C (524.3°F)
Melting Point: 158.9°C (318°F)
Critical Temperature: Not available.
Specific Gravity: Not available.
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility: Soluble in cold water, hot water.
Section 10: Stability and Reactivity Data
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Reactive with acids.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Polymerization: Not available.
Section 11: Toxicological Information
Routes of Entry: Dermal contact. Eye contact. Inhalation. Ingestion.
Toxicity to Animals: Acute oral toxicity (LD50): 20 mg/kg [Rat.].
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans:
Very hazardous in case of ingestion. Hazardous in case of skin contact (irritant, permeator), of inhalation.
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Not available.
Special Remarks on other Toxic Effects on Humans: May be fatal. Material is irritating to mucous membranes and upper
respiratory tract.
Section 12: Ecological Information
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Waste Disposal:
Section 14: Transport Information
DOT Classification: CLASS 6.1: Poisonous material.
Identification: : Aminopyridine UNNA: UN2671 PG: II
Special Provisions for Transport: Not available.
Section 15: Other Regulatory Information
Federal and State Regulations:
Pennsylvania RTK: P-Aminopyridine (For Synthesis) (4-Aminopyridine) Massachusetts RTK: P-Aminopyridine (For Synthesis) (4-Aminopyridine) TSCA 8(b) inventory: P-Aminopyridine (For Synthesis) (4-Aminopyridine) SARA
302/304/311/312 extremely hazardous substances: P-Aminopyridine (For Synthesis) (4-Aminopyridine)
Other Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
Other Classifications:
WHMIS (Canada): CLASS D-1A: Material causing immediate and serious toxic effects (VERY TOXIC).
DSCL (EEC):
R28- Very toxic if swallowed. R36/38- Irritating to eyes and skin.
HMIS (U.S.A.):
Health Hazard: 4
Fire Hazard: 1
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 4
Flammability: 1
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator
when ventilation is inadequate. Splash goggles.
Section 16: Other Information
References:
-Hawley, G.G.. The Condensed Chemical Dictionary, 11e ed., New York N.Y., Van Nostrand Reinold, 1987. -SAX, N.I.
Dangerous Properties of Indutrial Materials. Toronto, Van Nostrand Reinold, 6e ed. 1984. -The Sigma-Aldrich Library of
Chemical Safety Data, Edition II. -Guide de la loi et du règlement sur le transport des marchandises dangeureuses au canada.
Centre de conformité internatinal Ltée. 1986.
Other Special Considerations: Not available.
Created: 10/09/2005 03:42 PM
Last Updated: 11/06/2008 12:00 PM